SYMPTOM | Check/Remedy |
•The main unit is not working. • Turn off the power and hold the STOP (@) button on the
(Example: The power goes out remote control for longer than 5 seconds. STAND BY RED
or strange noise is heard.) | LED blinks on the display and all settings will return to the |
• The Home Cinema System is | default values. |
not working normally. |
|
| Using the RESET function will erase all stored settings. |
| Do not use this unless it is necessary. |
|
|
The password for rating level has | • While “NO DISC” message appears on the display of main |
been forgotten. | unit, hold the main unit's STOP (@) button for longer than 5 |
| seconds. “INITIAL” appears on the display and all settings will |
| return to the default values. |
| • Press the POWER button. |
| Using the RESET function will erase all stored settings. |
| Do not use this unless it is necessary. |
|
|
Can't receive radio broadcast. | • Is the antenna connected properly? |
| • If the antenna's input signal is weak, install an external FM |
| antenna in an area with good reception. |
EnG
troubleshooting ●
53