Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
By default, the remote control is set to work with Samsung TVs.
See page 63 for more information about remote control operation with other manufacturer's TVs.

19

2
3
Press TV button to
set the remote to
TV mode.
Press the POWER
button to turn on
your Samsung TV
with this remote.
56
Press FUNCTION button
on the main unit or DVD
button on the remote to
enable DVD/CD playback.
1
Plug the main unit's
power cord into the
AC power supply.
4
Press DVD RECEIVER
button to switch to
DVD RECEIVER
mode.
Note
Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are
using, these instructions may vary slightly. Read the instructions carefully before using.

Before Using Your Home Theater

To Operate your Samsung TV and the Home Theater with the HT-XQ100G's Remote Control
Press TV/VIDEO
button to select
VIDEO mode on
your TV.
ENG

20

VIDEO
OPERATION

Connecting the FM Antenna

The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
Cooling Fan
Connect the FM antenna supplied to the FM 75COAXIAL terminal.
Slowly move the antenna wire around until you find a location where reception is good,
then fasten it to a wall or other rigid surface.
FM Antenna (supplied)
1
2
This unit does not receive AM broadcasts.
Notes
1p~38p(XQ100G)-ENG 2003.4.6 9:16 AM Page 22