Connecting External Components

Connecting an External Digital Component

Example: Digital signal components such as a DVD or CD Recorder.

VOLTAGE

SELECTOR

Optical Cable (not included)

The AC Cord must be plugged into an appropriate socket.

Before plugging your system into an AC outlet, you must check the voltage.

Check the position of the voltage selector on the rear of the

DIGITAL OUT system (OPTIONAL).

1. Plug the AC Cord on the rear of the system into an appropriate outlet.

2. Press the On/Standby button to switch your DVD Player system on.

1 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.

2 Press AUX on the remote control to select ‘DIGITAL IN’.

Each time the button is pressed, the selection changes as follows: DIGITAL IN AUX 1 AUX 2.

You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD/CD DIGITAL IN AUX1 AUX2 FM AM.

Connecting an External Analog Component

Example: Analog signal components such as a VCR, Camcorder, and TV.

VOLTAGE

SELECTOR

Audio Cable

If the external

analog component has only one Audio Out, connect either left or right.

L R

VIDEO OUT

VIDEO IN

COMPONENT VIDEO OUT

1 Connect Audio In on the DVD player to Audio Out on the external analog component.

Be sure to match connector colors.

2 Press AUX on the remote control to select AUX 1 or AUX 2.

Each time the button is pressed, the selection changes as follows: DIGITAL IN AUX 1 AUX 2.

You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD/CD DIGITAL IN AUX1 AUX2 FM AM.

CONNECTIONS

15

16