Before Using Your DVD Player

Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc you are using, these instructions may vary slightly. Read the instructions carefully before using.

1 Plug the power cord into the AC power supply.
4 Press TV/VIDEO button to select VIDEO mode.
Press the MODE2 button so that the TV indicator on the remote control flashes.

TV DVD RECEIVER

Press the MODE

5 button so that theDVD RECEIVER indicator on the remote control flashes.
3 Press the POWER button to turn on the TV.
6 Press DVD button to select DVD/CD mode.

TV DVD RECEIVER

Selecting the Video Format

Turn off the main unit and then press NTSC/PAL.
To Operate the TV and DVD Player with a Single Remote ControlPress MODE button.
By default, the video format is set to "NTSC".

Each time the button is pressed, the video format switches between "NTSC" and "PAL".

Each country has a different video format standard.

For normal playback, the video format of the disc must be the same as the video format of your TV.

17

Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately.

You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.

Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.

By default, the remote control is set to work with Samsung TVs. See page 59 for more information on the operation of the remote control.