Controlling a TV with the Remote

You can use the remote control to operate other manufactures’ TV.

1

Turn on the TV.

 

2

Point the DVD’s remote at the TV.

3

TV

 

While holding thebutton down, enter the
code for your brand.

 

•If there is more than one code listed in the table, enter one at a time to determine which code works.

 

example : For SAMSUNG 1TVs

TV

 

 

While holding down the

button,

 

 

enter

 

 

 

 

.

 

 

 

 

 

 

 

 

 

 

 

 

4

If the TV turns off, setup is complete.

• Now, you can perform the following operations on the TV.

 

 

 

 

 

 

 

 

TV

: Turn on or off the TV.

 

 

 

 

VOLUME +/–

: Adjust the volume.

 

 

 

 

 

 

 

 

 

TV/VIDEO

: Set the input mode (either TV or VIDEO)

 

 

 

CHANNEL +/–

: Change the channels.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manufacturer

CODES

Samsung

01~06,32

Akai

12

FIisher

12

Grundig

09,17,21

Hitachi

11,13,14,24

JVC

32

LG

02,30

Mitsubishi

02,16

Mival

29

Nokia

23

Nordmende

13,14,24

Panasonic

08,23~27

Philips

02,20,22

Saba

13,14,22~24

Sanyo

12,16

Schneider

02

Sharp

10,31

Sony

15,16

Telefunken

14,24,28

Thomson

13,14,24,33,34

Toshiba

07,16~19,21

• Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

Connecting your System to the Power Supply

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the voltage.

Check the position of the voltage selector on the rear of the system (OPTIONAL).

1.Plug the main lead (marked AC Cord on the rear of the system) into an appropriate socket.

2.Press the On/Standby button to switch your DVD Player system on.

13