Listening to the Radio
You can listen to the chosen band (FM, MW or LW broadcast stations) by using either the automatic tuning or manual tuning operation.
Remote
Control
Unit
1
Press the Tuner(Band) button.
•The selection toggles back and forth between "FM" "MW" and "LW" each time the Tuner(Band) button is pressed.
2
Select a broadcast station.
Auto Station 1 | When the |
| button is pressed, a preset | |
broadcast station is selected. | ||||
| ||||
| Hold in the | button. Automatic searching | ||
Auto Station 2 | ||||
begins, and then stops when a station is tuned in. | ||||
| ||||
| Press the | button to tune to the chosen | ||
Manual Station | ||||
station. The frequency changes incrementally in either | ||||
| ||||
| ||||
direction each time the corresponding button is pressed.
Main
1
Press the Function button to
2
Unit select the desired band (FM, MW or LW).
Select a broadcast station.
Auto Station 1 | Press the Stop ( |
| ) button to select the PRESET | ||
mode. Then press the |
| button to select a | |||
|
| ||||
| |||||
station stored in the preset
Auto Station 2
Manual Station
Audio
MO/ST
Press the Stop ( 
) button to select the MANUAL mode on the front panel. Then hold in the 
button to make the unit begin automaticall searching for
broadcast stations.
Press the Stop ( 
) button to select the MANUAL
mode front panel. Press the 
button to tune to the desired station. The frequency changes incrementally in either direction each time the corresponding button is pressed.
Press the MO/ST button. (only FM)
•The selection toggles back and forth between “STEREO” and “MONO” each time the MO/ST button is pressed.
•In a poor reception areas, select Mono mode for a clear,
39