Samsung HTDS900RH/EDC How to Connect to Anynet, Connectingthe FM and AM Antennas, What is Anynet?

1p~40p(DS700)-GB-NOR 2004.3.10 9:32 AM Page 20

How to Connect to Anynet

Using the Anynet function, the DVD Home Theater System can be conveniently controlled from your Samsung TV. By connecting the Anynet output terminal on the DVD Home Theater System to the input terminal of any Samsung Anynet-enabled device, both can be controlled from your TV. For detailed operation instructions and connection diagram, refer to the user's manual of your Anynet-enabled TV.

What is Anynet?

•The Anynet function allows you to use your TV's remote control and menu to control all AV devices.

•However, this function is available only with Anynet-enabled models.

Connectingthe FM and AM Antennas

If AM reception is poor, connect an out- door AM antenna(not supplied).

AM Loop Antenna	CONNECTIONS
(supplied)

VIDEO IN

ANYNET

TERMINAL

IMPEDANCE SUBWOOFER : 4Ω

FRONT / CENTER / REAR : 4Ω

CENTER	REAR	FRONT
	L	L
SUBWOOFER REAR		FRONT
	R	R

Other AV devices

Samsung DVD player

Samsung VCR

Samsung Set-Top Box

Use this to connect Anynet-enabled

AV devices when necessary.

FM Antenna (supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

IMPEDANCE SUBWOOFER : 4Ω

FRONT / CENTER / REAR : 4Ω

CENTER	REAR	FRONT
	L	L
SUBWOOFER REAR		FRONT
	R	R

FM antenna connection

AM antenna connection

1 Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet output terminal.

2 Connect the Anynet Out Terminal on the back of this unit to the Anynet input of Samsung external AV devices.

3 Refer to the user's manual of your Anynet-enabled TV and activate the Anynet function.

1.Connect the FM antenna supplied to the FM 75Ω

COAXIAL terminal as a temporary measure.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

•If reception is poor, connect an outdoor antenna. Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM antenna.

1.Connect the AM loop antenna supplied

to the AM and terminals.

2.If reception is poor, connect an outdoor single vinyl-covered wire to the AM ter- minal. (Keep the AM loop antenna con- nected).

*This function is available only with Anynet-enabled TVs.

Caution • If the Anynet input and output terminals are reversed, communication with the TV will fail and you will not be able to use the Anynet function.

Cooling Fan	The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
	normally. The cooling fan is activated automatically to supply cool air to the unit.
	Please observe the following cautions for your safety.
	• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
	and may damage it.
	• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
	newspaper or cloth, heat may build up inside the unit and fire may result.)

17 18