Disc Playback, Disc terminology, Dvd Vcd Cd, Group

1p~40p(DS700)-GB-NOR 2004.3.10 9:32 AM Page 24

Disc Playback

2 Load a discs.

•Place a disc gently into the tray with the disc’s label facing up.

	• Playback starts automatically.
	Note
•	Depending on the content of the disc, the initial screen may
•	appear different.
•	Depending on the recording mode, some MP3-CDs cannot
•	be played.
•	Table of contents of a MP3-CD varies depending on the
	MP3 track format recorded on the disc.

press STOP during playback.

•If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory. If PLAY/PAUSE

( ) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)

•If pressed twice, “STOP” is displayed, and if

PLAY/PAUSE ( ) button is pressed, playback starts from the beginning.

•To resume playback, press PLAY/PAUSE ( ) but- ton again.

•DVD-audios are divided into several large sections called "groups" and smaller sections called "tracks". Numbers are allotted to these sections.

These numbers are called "group numbers" and "track numbers".

•DVD-videos are divided into several large sections called "titles" and smaller sections called "chapters". Numbers are allotted to these sections.

These numbers are called "title numbers" and "chapter numbers".

•Video and music CDs are divided into sections called "tracks".

Numbers are allotted to these sections. These numbers are called "track numbers".

TRACK 1		TRACK 2		TRACK 3		TRACK 4		TRACK 5

Note	• In this manual, the instructions marked with "DVD (	DVD	)" are applicable
	to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
	Where a particular DVD type is mentioned, it is indicated separately.

•Depending on the content of the disc, the initial screen may appear different.

CONNECTIONS