USE iPod/iPhone WiTH A WiRElESS DOcK cRADlE FOR iPod/iPhone
You can enjoy fi ner quality of music through the speaker by sending iPod/iPhone’s audio signal using a Wireless Transmitter.
The Wireless Transmitter's linking ID is preset at the factory and the main unit and Wireless Transmitter should link (connect wirelessly) automatically when main unit is turned on. If the link indicator does not light when main unit and Wireless Transmitter are turned on, ID setting must be made manually. (See page 14)
Turn on the main unit and connect the iPod/iPhone to the Wireless transmitter. Then press O/A inPUT button on the remote control to select "iPod" mode.
The inPUT mode of the main unit will switches as follows. repeatedly press DIGI.1 ➡ DIGI.2 ➡ ANALOG ➡ iPod ( See page 16 )
The Sound bar will not be turned off if iPod/iPhone is not connected to the Wireless Transmitter.
HOW TO cHARGE THE WiRElESS TRAnSMiTTER
EnG
cOnnEcTiOnS ●
1.Connect the Wireless Transmitter to the Charging Cradle.
. Connect the DC power adaptor to a wall socket.
•The charging indicator lights up and charging starts. After the battery is fully charged, the charging indicator turns Green.
OPERATiOn STATUS OF THE cHARGinG cRADlE'S lED
1
LINK
STANDBY
2
STANDBY
|
| CHARGE |
Display | Function | CHARGE |
|
| |
GREEn lED On | Power on /Charging completed |
|
RED lED On | Charging. |
|
▪ | The indication is the charging state of the | |
| Check the charging state of iPod/iPhone by checking the charging indication of its battery. |
▪ The Wireless Transmitter can be only charghed by the supplied adaptor.
iPod/iPhone MODElS THAT cAn BE USED WiTH THiS PRODUcT
iPod nano | iPod 5G | 2G nano |
|
|
|
classic | 1G touch | iPhone |
|
|
|
iPhone 3G | 4G nano | 120GB classic |
|
|
|
2G touch | iPhone 3GS | 160GB classic |
|
|
|
5G nano |
|
|
|
|
|
▪“Made for iPod” means that an electronic accessory has been
designed to connect specifi cally to iPod and has been certifi ed by the developer to meet Apple performance standards.
▪“Made for iPhone” means that an electronic accessory has been designed to connect specifi cally to iPhone and has been certifi ed by the developer to meet Apple performance standards.
▪Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
▪The volume control may not be operated normally except at the referred models. If there is any error happened at the models above, please update the software of iPod/iPhone at the lastest version.
1