Advanced Functions, Using the input mode

ADVANCED FUNCTIONS

ENG

You can select either AUX, HDMI, USB input or ARC input.

Press an appropriate button on the remote control to select a desired mode, or press to select one from: AUX, HDMI, USB or ARC mode.

The unit turns off automatically in the following situations:

•Aux Mode: If no cable is inserted in the jack for 20 minutes.

•USB Mode: If the “NO USB” or “Stop” state lasts for 20 minutes.

● FUNCTIONS

To connect the Crystal Surround Air Track to a USB HOST device

1. Connect the USB device to the USB port on the side of the unit.

2. Press the () button on the front panel of the Air Track repeatedly until USB appears.

•Each time the button is pressed, the selection changes as follows :

AUX ➡ HDMI ➡ USB ➡ ARC

3. USB appears on the display screen and then disappears.

•The Crystal Surround Air Track connection is complete.

•It automatically turns off (Auto Power Off) if no USB device has been connected for more than 20 minutes.

Compatibility: USB storage

•If the file name of a folder on a USB device exceeds 10 characters, it is not displayed on the VFD.

•This product may not be compatible with certain types of USB storage media.

•The file systems FAT16 and FAT32 are supported. -- The NTFS file system is not supported.

•Connect a USB device directly to the USB port of the product. Otherwise, you may encounter a USB compatibility problem.

•Do not connect multiple storage devices to the product via a multi- card reader. It may not operate properly.

•Digital camera PTP protocols are not supported.

•Do not remove the USB device while it is being read.

•DRM-protected music files (MP3, WMA) from a commercial web site will not be played.

•External HDDs are not supported.

•Compatibility list