Samsung HW-F850/EN, HW-F850/ZG, HW-F850/ZF manual Using the Smart VOL function

functions

AUDIOAUDIO SYNCSYNC	SMART VOL SPEAKERSPEAKER
S/W LEVEL	VOLVOL

Using the SMART VOL function

This will regulate and stabilize the volume level against a drastic volume change caused by a channel change or scene transition.

Press SMART VOL on the remote control.

•Each time the button is pressed, the selection changes as follows :

SMART VOLUME ON ➡ SMART VOLUME OFF

Using the S/W LEVEL function

You can control the base volume with the S/W LEVEL button on the remote control.

1. Press an S/W LEVEL button on the Remote control.

2. “SW 0” appears on the display.

TVTV CHCH

TVTV CHCH

TONE

AUTO POWER

3. Press or button on the LEVEL key if you want to increase or

decrease the subwoofer volume. You can set it from SW -6 to SW +6.

Using the AUTO POWER LINK function

DRC REPEAT

AUDIOAUDIO SYNCSYNC SMARTSMART VOLVOL SPEAKERSPEAKER

TVTV CHCH

AUTOAUTO POWERPOWER

DRC REPEAT

AUDIO SYNC SMARTSMART VOLVOL SPEAKERSPEAKER

TVTV CHCH

AUTOAUTO POWERPOWER

DRC REPEAT

AUDIOAUDIO SYNCSYNC SMARTSMART VOLVOL SPEAKERSPEAKER

The Crystal Surround Air Track is automatically turned on when you turn on the TV or any device connected to the Air Track with the optical cable.

Press AUTO POWER on the remote control of this unit.

•The Auto power link function turns on and off each time you press AUTO POWER.

AUTO POWER LINK	Display
ON	POWER LINK ON
OFF	POWER LINK OFF

 If a TV or any device connected to Air Track with the optical cable is off and there is no digital input, the Air Track is turned off after 20 minutes.

These functions are available only when the Anynet+ (HDMI-CEC) is turned off.

Using the AUDIO SYNC function

Video may appear out of synch with the audio if the Air Track is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.

Press AUDIO SYNC / on the remote control of this unit.

•You can use the , buttons to set the audio delay time between 0 ms and 300 ms.

 In USB mode, TV mode or BT mode, the Audio Sync function may not work.

Using the DRC function

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

Press DRC on the remote control of this unit.

•Each time the button is pressed, the selection changes as follows :

DRC STANDARD ➡ DRCMAX ➡ DRCMIN

22