Bunn JDF-4S service manual Door Cover Installation

DOOR COVER INSTALLATION

1.Install door cover by first plugging the door harness connector into the machine harness connector located at the bottom of the machine door.

JDF-2S	P3577	JDF-4S
2. On Portion Control models, connect membrane		3. Install door cover
switches to Door Circuit Board.

JDF-4S Shown JDF-2S & JDF-4S P3578

4. Secure the door cover using 5 screws provided.

JDF-2S P3579 JDF-4S P3840

5 44744.2 110813