TROUBLESHOOTING (cont.) |
|
|
PROBLEM | PROBABLE CAUSE | REMEDY |
Water leak filling drip tray or around | 1. Initial fill/setup | Some expansion normal. May fill |
dispense deck area |
| drip tray during initial ice block |
|
| formation |
| 2. Dispense deck | Inspect or replace fittings clamps, |
|
| |
|
| nect fittings. |
|
| NOTE: Dispense deck area slopes |
|
| to drain tube that leads to the drip |
|
| tray. |
| 3. Water pressure greater than |
| 100psi |
Water leaking beneath machine | 1. Bath tank overflow. |
| 2. Condensation from cabinet cool- |
| ing coil. |
Erratic spray during dispense | Dispense nozzle mixer missing or |
| broken |
Dispense nozzle dripping water | Dispense solenoid. |
Install water pressure regulator and reduce to 50 psi.
A)Check all internal water connec- tions.
B)Check internal plumbing con- nections.
Check for routing of condensation tube to water bath.
Replace mixer.
Replace dispense deck solenoid.
24 | 44744.2 062912 |
|
