LOADING
Frozen Concentrates
1. Thaw the frozen concentrate in a refrigerated
NOTE: Loading frozen concentrate in the product cabinet may cause damage to the machine. This damage is not covered by warranty.
2.Thoroughly mix the thawed concentrate by vigorously shaking the product container.
3.Open the dispenser door.
4.Prior to placing the product container in the dispenser, make sure that the
5.Place the product container in the desired position and press it firmly into the bottle adapter opening.
6.Open the vent hole in the product container.
Note: Concentrate in the container must be completely thawed and be within the temperature range of
Ambient Concentrates (Optional)
1.Install an Ambient Concentrate Conversion Kit
2.Attach the concentrate product hose to the appropriate concentrate line located at the rear of the dispenser.
3.Attach the other end of the product hose to the product container through an appropriate fitting.
PRIMING
1.Open the dispenser door
2.Load concentrate per instructions in section titled Loading.
3.Close the dispenser door.
4.Place a large container under the appropriate dispense nozzle.
Press and hold the “Product Dispense Switch” Fig 5, until concentrate dispenses from the dispense nozzle. Note: This may take several seconds, depending on the installation and set pump speed.
15 | 44744.2 110813 |
|