Samsung HW-H450/TK manual + Installing the Batteries in the Remote Control, Play/Pause, Skip Back

REMOTE CONTROL

POWER

Turns the Soundbar on and off.

VOLUME

Adjusts the volume level of the unit.

Play/Pause

Press the ► button to pause playing the file temporarily.

Press the ► button again to play the selected file.

Skip Back

If there is more than one file on the device you are playing, and you press the # button, the previous file is selected.

SOUND EFFECT

You can select from 5 different sound modes - MUSIC, VOICE, SPORTS, CINEMA, and STANDARD - depending on the type of sources you want to enjoy.

Press the SOUND EFFECT button on the remote control. Select the STANDARD mode if you want to enjoy the original sound.

Press the SOUND EFFECT button for more than 5 seconds to turn on or off Smart Volume.

* Smart Volume This will regulate and stabilize the volume level against a drastic volume change caused by a channel change or scene transition.

Bluetooth POWER

Press the Bluetooth POWER button on the remote to turn the Bluetooth POWER on function on and off.

See pages 19 and 20 for details.

3D SOUND (3D Sound Plus)

Press the 3D SOUND button on the remote to add depth and spaciousness to the sound.

Press the 3D SOUND on the remote control.

Each time the button is pressed, the selection changes as follows :

3D SOUND PLUS OFF  3D SOUND PLUS MUSIC  3D SOUND PLUS MOVIE

+Installing the Batteries in the Remote Control

1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.

2. Insert a 3V lithium battery. Keep the	3. Use a suitable coin to turn the
positive (+) pole facing up when	remote control battery cover
inserting the battery. Put the battery	clockwise as far as it will go to
cover on and align the '' marks side	fix it in place.
by side as shown in the figure above.

10