REMOTE CONTROL
POWER
POWER
Turns the SoundStand on and off.
MUTE
You can turn the volume down to 0 with the push of a button. Press again to restore the sound to the previous volume level.
MUTE
SOURCE
VOLUME
Adjusts the volume level of the unit.
SOUND EFFECT
Press to select a sound effect mode. Select the STANDARD mode if you want to enjoy the original sound.
When you choose a Sound Effect mode (except STANDARD), Surround Sound Expansion will automatically be turned OFF.
Skip Back
If there is more than one file on the device you are playing, and you press the # button, the previous file is selected.
Bluetooth POWER
Press the Bluetooth POWER button on the remote to turn the Bluetooth Power function on and off.
See pages 16 and 18 for details.
AUDIO SYNC
If the SoundStand is connected to a digital TV and the video appears out of sync with the audio, press the Audio Sync buttons to sync the audio with the video.
Press the AUDIO SYNC +/- buttons to set the audio delay from 0 to 300 ms. In USB mode, TV mode, or BT mode, the Audio Sync function may not work.
VOL
Surr.
Sound
SOUND |
|
EFFECT | SYNC |
|
Bluetooth | SYNC |
POWER |
|
WOOFER LEVEL
DIMMER
REPEAT
+Installing the Batteries in the Remote Control
1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.
2.Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on and align the '
' marks side by side as shown in the figure above.
3.Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.
10
