FUNCTIONS

If asked for a PIN code when connecting a Bluetooth device, enter <0000>. ●Only one Bluetooth device can be paired at a time.

The Bluetooth connection will be terminated when you turn the Soundbar off.

The Soundbar may not perform Bluetooth search or connection correctly under the following circumstances:

--If there is a strong electrical field around the Soundbar.

--If several Bluetooth devices are simultaneously paired with the Soundbar. --If the Bluetooth device is turned off, not in place, or malfunctions.

Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, which can cause electric interference.

The Soundbar supports SBC data (44.1kHz, 48kHz).

Connect only to a Bluetooth device that supports the A2DP (AV) function.

You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function. ●Once the set has been paired with a device, if the soundbar is in DIN, AUX, or USB mode and you select “[AV]samsung soundbar Kxxx K-ser" from your Bluetooth device's list, the set will automatically change to

BT mode.

--Available only if the Soundbar is listed among the Bluetooth device’s paired devices. (The Bluetooth device and the Soundbar must have been previously paired at least once.)

Soundbar will appear in the Bluetooth device’s searched devices list only when the Soundbar is displaying

BT READY.

In the TV SoundConnect mode, the Soundbar cannot be paired or connected to Bluetooth device.

BLUETOOTH POWER ON (BLUETOOTH POWER)

If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth POWER On function is on and the Soundbar is turned off, the Soundbar turns on automatically.

1.Press the Bluetooth POWER button on the remote while the Soundbar is turned on.

2.ON - BLUETOOTH POWER appears on the Soundbar's display.

TO DISCONNECT A BLUETOOTH DEVICE FROM THE SOUNDBAR

You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's user manual. ●● The Soundbar will be disconnected.

●● When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display BT DISCONNECTED on the front display.

TO DISCONNECT THE SOUNDBAR FROM A BLUETOOTH DEVICE

Press the SOURCE button on the remote control or the (Source) button on the product's right side to switch from BT to another mode or turn off the Soundbar.

●● The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)

ENG

27

Page 27
Image 27
Samsung HW-K360/SQ manual Bluetooth Power on Bluetooth Power, To Disconnect a Bluetooth Device from the Soundbar, BT mode