Philips 60PP9202, 50PP 9202, 43PP9202 manual Selecting the STEREO/MONO Sound Mode, Soundbass

Using the Onscreen Submenus: Sound

SELECTING THE STEREO/MONO SOUND MODE

You can enjoy stereo programs on your TV. It has both an amplifier and twin

speakers through which stereo sound can be heard. While watching the channel or signal source for which you want to select STEREO, follow the steps below.

NOTE: When you connect a mono (non- stereo) device to the TV, such as a mono VCR, you must be sure to select MONO for the AV source to which you connected the device. Otherwise, you will receive sound from only one speaker. The reason is that in connecting the mono device, you can use only one audio input (Left or Right channel). This will produce sound in only one speaker when the sound setting for the AV source is

STEREO.

BEGIN

1 Press the MENU/SELECT button on the remote control to show the onscreen menu.

2 Press the CURSOR RING DOWN

once to highlight SOUND.

3 Press the CURSOR RING RIGHT to enter the SOUND submenu.

4 Press the CURSOR RING DOWN repeatedly until the STEREO control is highlighted.

5 Press the CURSOR RING RIGHT or LEFT to select STEREO or MONO. When STEREO has been selected, the television will reproduce any stereo signal it receives.

6 Press the STATUS/EXIT button to exit the menu.

PICTURETREBLE

SOUNDBASS

FEATURES BALANCE

INSTALLAVL

INCR . SURROUND

POWER

	TV	VCR		ACC	3,5
6	SOUND	PIP CH	ACTIVE
	SWAP		CONTROL FREEZE
	DN	UP
	STATUS/			MENU/
	EXIT			SELECT
2,4		MUTE				1
				CH
	1	2		3
	4	5		6
	7	8		9
	TV/VCR	0
	A/CH			SURF
	POSITION		PIP

SOUND
TREBLE	30

BASS

BALANCE

AVL

INCR .SURROUND

SOUND

BALANCE

AVL

INCR . SURROUND

HEADPHONE

STEREO MONO

	OR
STEREO	STEREO

34