NOTES

•• Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete.

•• Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

•• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the STANDBY LED on the rear will be Red after blinking Blue several times.

•• If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption.

•• The maximum transmission distance of the wireless signal of the main unit is about 10 meters, but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer the system may not operate at all, because the wireless signal cannot penetrate metal.

PRECAUTIONS

•• Wireless receiving antennas are built into the wireless subwoofer. Keep the units away from water and moisture.

•• For optimal listening performance, make sure that the area around the wireless subwoofer and Wireless Receiver Module (Sold separately) location is clear of any obstructions.

Connecting the SWA-8500S to a Soundbar (Sold Separately)

Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA‑8500S) to your Soundbar (Sold separately).

1.Connect the Wireless Receiver Module to 2 Surround Speakers.

––The speaker cables are colour coded.

LR

 

SURROUNDSPEAKERSOUT

 

SURROUND-LEFT

SPEAKERIMPEDANCE:3￿

SURROUND-RIGHT

IDSET

 

 

 

L

R

SURROUND-LEFT

 

SURROUND-RIGHT

SURROUNDSPEAKERSOUT

POWER

ENG - 8