ŝ113Ş
Starting PC mode
ƃIn this mode, you can download stored images to your PC through the USB
cable.
ƃThe LCD monitor is always turned off in PC mode.
1. Connect the PC to the camera with the USB
cable.
2. Select the [Computer] menu.
ƈConnecting the camera to a PC
ƃIf you have installed the camera driver, The [Found New Hardware Wizard]
may not open.
ƃOn a Windows 98 SE system, the Found New Hardware Wizard dialog box
opens and a window asking you to select a driver file may appear. In this
case, specify "USB Driver" in the CD supplied.
INFORMATION
5. After restarting the computer, connect the PC
to the camera with the USB cable.
6. Turn the camera power on.
The [Found New Hardware Wizard] will open
and the computer will recognize the camera.
ſIf your OS is Windows XP, an image viewer
program will open.
If the download window of Digimax Master opens after starting Digimax
Master, the camera driver was setup successfully.
Setting up the application software
ſIf you selected [Printer] in Step 2, when you connect the camera to your
printer, the [Connecting Printer] message will display and the connection will
not be established. In this case, disconnect the USB cable, and then follow
the procedure from Step 1 and onward.
Computer
Printer
Select USB