《17》
Starting the recording mode
■How to use the PROGRAM mode ( )
Selecting the program mode will configure the
camera with optimal settings. You can still manually
configure all functions except the aperture value and
shutter speed.
1. Select the Program mode by rotating the mode
dial.
2. Press the horizontal smart button to
configureadvanced functions such as image size
(p.28), quality (p.30), metering (p.29) and
continuous shooting (p.28).
※Refer to page 26 - 34 for more information about
the menus.
■How to use the AUTO mode ( )
Please select this mode for quick and easy picture taking with minimal user
interaction.
7
[AUTO mode]
7
[PROGRAM mode]
●If the auto focus frame turns to red when you press the shutter button down
half way, it means that the camera cannot focus on the subject. Should this
be the case, the camera is unable to capture an image clearly from that
position. Move further away from the subject and try again.
INFORMATION
1. Insert the battery (p.12) taking note of the correct
polarity (+ / -).
2. Insert the memory card (p.12). As this camera has
a 19MB internal memory, it is not essential to
insert the memory card. If the memory card is not
inserted, an image will be stored in the internal
memory. If the memory card is inserted, an image
will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date / time displayed on the LCD monitor is
incorrect, reset the date / time before taking a
picture.)
5. Select the Auto mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image by using the
LCD monitor.
7. Press the shutter button to capture an image.