《64》
Setting up the play back function using the LCD monitor※Menus are subject to change without prior notice.
Menu tab Main menu Sub menu Secondary menu Page
Auto -
Draft -
Normal -
Fine -
Auto -
Off -
On -
Auto -
Off -
On -
No -
Yes -
Reset
Quality
p.73
Date Print
File Name
p.72
1. Use the Up / Down buttons to select the [Show]
menu and press the Right button.
2. Select a desired sub menu by pressing the
Up / Down button.
[Play] : The slide show is closed after
one cycle.
[Repeat Play] : The slide show is repeated until
cancelled.
3. Press the OK button and the slideshow will be started.
- To pause the slide shown while playing it back, press the play & pause
( ) button again.
- Pressing the play & pause( ) button again will cause the slide show
restart.
- To stop playback of the slide show, press the play & pause( ) button,
and then press the OK / Menu button.
■Images can be displayed continuously at pre-set intervals.
You can view the slide show by connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT / RIGHT button and select the [SLIDE SHOW] menu tab.
●Start the slide show : The slide show can start only in the [Show] menu.
Starting the slide show ( )Show
SLIDE SHOW
Effect
Music
Play
Repeat Play
Interval
Back Set
◀OK