《76》

Before contacting a service centre
The camera doesn’t switch on
ㆍThere is low battery capacity
→Insert fresh batteries. (p.12)
ㆍBattery is inserted incorrectly with the polarities reversed.
→Insert the battery according to the polarity marks (+, -)
The camera power ceases while in use
ㆍThe battery is exhausted
→Insert fresh batteries
ㆍThe Camera is turned off automatically
→Turn on the camera power again.
Battery power quickly drains
ㆍThe Camera is being used in low temperatures
→Keep the camera in warm conditions (i.e. inside a coat or jacket) and only
remove it in order to take images
■Please check the following
Camera does not take images when pressing the Shutter button
ㆍThere is insufficient memory capacity
→Delete unnecessary image files
ㆍThe memory card has not been formatted
→Format the memory card (p.48)
ㆍThe memory card is exhausted
→Insert a new memory card
ㆍThe memory card is locked
→Refer to [Card Locked!] error message
ㆍThe camera’s power is off
→Turn the camera power on
ㆍThe battery is exhausted
→Insert fresh batteries (p.12)
ㆍBattery is inserted incorrectly with the polarities reversed.
→Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ㆍThe camera stopped due to a malfunction
→Remove /re-insert battery and switch the camera on
The images are unclear
ㆍA picture was taken the subject without setting an appropriate macro mode
→Select an appropriate macro mode to take a clear image.
ㆍTaking a picture beyond the flash range
→Take a picture within the flash range
ㆍThe lens is smudged or dirty
→Clean the lens