Setting Up Your Remote Control

After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.

Note

The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.

Setting Up the Remote to Operate Your VCR

1Turn off your VCR.

2Press the MODE button and make sure that the VCR appears on the LCD screen.

3Press the SET button on your TV’s remote control.

4Using the number buttons on your remote control, enter three digits of the VCR code listed on page 58 of this manual for your brand of VCR. Make sure you enter three digits of the code, even if the first digit is a “0”.

(If more than one code is listed, try the first one.)

5Press the Power button on the remote control.

Your VCR should turn on if your remote is set up correctly.

If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try one of the other codes listed for your brand of VCR.

If no other codes are listed, try each VCR code, 000 through 072.

Note on Using Remote Control Modes: VCR

When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.

English-55

Page 57
Image 57
Samsung LE32M6, LE40M6 manual Setting Up Your Remote Control