Samsung LH105QMDNC/EN manual Reverse Side, Port Description

Reverse Side

――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

IR /AMBIENT

SENSOR IN

HDMI IN 3

HDMI IN 2

HDMI IN 1

DP IN 3

(UHD 30Hz)

DP IN 2

(UHD 60Hz)

DP IN 1

(UHD 60Hz)

DVI IN /	IR OUT	RS232C OUT RS232C IN
MAGICINFO IN
USB	RGB IN	AUDIO OUT
		RGB / DVI /
RJ45		HDMI /
		AUDIO IN

Port	Description
IR /AMBIENT SENSOR IN	Supplies power to the external sensor board or receives the light sensor signal.
HDMI IN 1, HDMI IN 2, HDMI IN 3	Connects to a source device using an HDMI cable or HDMI-DVI cable.
DP IN 3 (UHD 30Hz)	Connects to a PC using a DP cable.
	――Obtain sharp picture quality when viewing UHD content at 30 Hz.
	――The recommended resolution for the DP IN 3 (UHD 30Hz) port is 1920 x
	1080 @ 60 Hz. The resolution can be changed to the optimal resolution of
	3840 x 2160 @ 30 Hz, if required.
DP IN 2 (UHD 60Hz)	Connects to a PC using a DP cable.
	――Obtain sharp picture quality when viewing UHD content at 60 Hz.
DP IN 1 (UHD 60Hz)
DVI IN / MAGICINFO IN	DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
	MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
RJ45	Connects to MDC using a LAN cable.
IR OUT	Receives the remote control signal via the external sensor board and outputs the
	signal via LOOP OUT.
RS232C OUT	Connects to MDC using an RS232C adapter.
RS232C IN
USB	Connects to a USB device when upgrading software.
RGB IN	Connects to a source device using a D-SUB cable.
AUDIO OUT	Connects to the audio of a source device.
RGB / DVI / HDMI / AUDIO IN	Receives sound from a PC via an audio cable.

18