Samsung LH105QMDNC/EN manual Standby Control, Network Standby, Power Button

Power Control

Auto Power On	Off
PC Module Power
Standby Control	Auto
Network Standby	Off
Power Button	Power On Only

-- The displayed image may differ depending on the model.

Standby Control

You can set the screen standby mode to be applied when an input signal is received.

•• Auto

Power-saving mode will activate if no input signals are detected even though a source device is connected to the display. The message No Signal will appear if no source device is connected.

•• Off

The message No Signal will appear if no input signals are detected.

――If No Signal is displayed although a source device is connected, check the cable connection.

――If No Signal Message is set to Off, the No Signal message does not appear. If this is the case, set No Signal Message to On.

•• On

Power-saving mode will activate if no input signals are detected.

Network Standby

This feature keeps the network power on when the product turns off.

•• Off / On

Power Button

The power button can be set to either turn on the power or turn on/off the power.

•• Power On Only: Set the power button to turn on the power.

•• Power On/Off: Set the power button to turn on/off the power.

88