Introduction

Note

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods.

Remote Control Sensor

Aim the remote control towards this spot on the LCD Display.

Rear

Note

See the "Connections" section for details about cable connections. The LCD Display's configuration at the back may vary slightly depending on the model.

POWER S/W ON [ │ ] / OFF

Switches the LCD Display On/Off.

POWER

The power cord plugs into the LCD Display and the wall outlet.

IR OUT/IN

Receives a signal from the remote control and outputs the signal through Loopout when a removable sensor board is connected.

AMBIENT SENSOR IN

Supplies power to the removable sensor board and receives a signal from the light sensor.

DVI OUT (LOOPOUT)

Connect a monitor to another monitor through a DVI, DVI to HDMI cable.