Introduction

Note

The MAGICINFO OUT port must be connected to the [HDMI IN 2 (MAGICINFO)] port.

RJ 45 MDC (MDC PORT)

MDC(Multiple Display Control) Program Port

Connect the LAN cable to [RJ45 MDC] on the product and LAN on the PC. To use an MDC, the MDC program must be installed on the PC.

Note

Go to Multi Control and select RJ45 MDC as the MDC Connection.

RS232C OUT/IN (RS232C Serial PORT)

MDC(Multiple Display Control) Program Port

Connect a serial cable (cross type) to [RS232C] on the product and RS232C on the PC. To use an MDC, the MDC program must be installed on the PC.

Note

Go to Multi Control and select RS232C MDC as the MDC Connection.

RGB OUT

MagicInfo video output port

Note

Applicable to the 460UTn-2, 460UTn-B model only.

MAGICINFO OUT

Outputs MagicInfo HDMI signals. It should be connected to [HDMI IN 2 (MAGICINFO)] via an HDMI cable.

LAN (LAN Connection Terminal)

Connects to a LAN cable to allow Internet or network access in MagicInfo mode.

Note

Applicable to the 460UTn-2, 460UTn-B model only.