Introduction

POWER S/W ON [ │ ] / OFF

Switches the LCD Display On/Off.

POWER

The power cord plugs into the LCD Display and the wall outlet.

IR OUT/IN

Receives a signal from the remote control and outputs the signal through Loopout when a removable sensor board is connected.

DVI OUT (LOOPOUT)

•Connect a monitor to another monitor through a DVI, DVI to HDMI cable.

•Connect a DVI or DVI-HDMI cable to [DVI OUT (LOOPOUT)] on the product and [DVI IN] or [HDMI IN] on another monitor.

•HDMI and network signals sent via the [DVI OUT(LOOPOUT)] port are dis- played on the second display which has the [DVI IN] port.

Note

•The Loopout function can be used to du- plicate the screen of the primary display. Connect [DVI OUT] on the primary dis- play to [DVI IN] or [HDMI] on another display.

•A maximum of 100 monitors can be con- nected to DVI-Loopout (using a 2m-long DVI cable). Up to Full HD resolution can be supported. Compatible input sources include DVI IN, HDMI IN 1, and HDMI IN 2 (MagicInfo).