Reverse Side
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
CONTROL
IN
USB 
RJ45
DVI/RGB/
MAGICINFO IN
HDMI 1
HDMI 2
RS232C | RS232C |
| AUDIO IN | AUDIO OUT | DP OUT |
IN | OUT | IR OUT | (LOOPOUT) |
DP IN
Port | Description |
|
|
CONTROL IN | Supplies power to the external sensor board. |
|
|
USB | Connect to a USB memory device. (applicable for updates and Clone Product only) |
|
|
RJ45 | Connects to MDC using a LAN cable. |
|
|
DVI/RGB/MAGICINFO IN | DVI: Connects to a source device using a DVI cable or |
| RGB: Connects a |
| MAGICINFO IN: To use MagicInfo, make sure to connect the |
|
|
HDMI1, HDMI 2 | Connects to a source device using an HDMI cable. |
|
|
DP IN | Connects to a PC using a DP cable. |
|
|
RS232C IN | Connects to MDC using an RS232C adapter. |
|
|
RS232C OUT |
|
|
|
IR OUT | Receives the remote control signal via the external sensor board and outputs the |
| signal via LOOP OUT. |
|
|
AUDIO IN | Receives sound from a PC via an audio cable. |
|
|
AUDIO OUT | Connects to the audio of a source device. |
|
|
DP OUT (LOOPOUT) | Connects to another product using a DP cable. |
| ――When connecting monitors through DP Loopout, using the DP cable that came |
| with the package is recommended. |
| ――This port uses an algorithm that is specific to UHD resolution input and |
| output. The port is not compatible with monitors that have FHD content- |
| specific DP Loopout ports. Connecting Loopout ports between monitors of |
| the same model is recommended. |
|
|
16