Samsung LH49RMHELGW/EN manual Wi-Fi Direct, Soft AP Wi-Fi Hotspot

Wi-Fi Direct

MENU m → Network → Wi-Fi Direct → ENTER E

――To use this function, your mobile device should be supported by the Wi-Fi Direct.

Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a router.

To connect your mobile device with your product using Wi-Fi Direct, follow these steps:

1	Go to Wi-Fi Direct screen. The product starts to search devices.
2	Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.

•• PBC (Push Button Configuration): Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. Your product automatically acquires all the network setting values it needs and connects to your network.

•• PIN: Input the displayed PIN on your device.

Soft AP (Wi-Fi Hotspot)

MENU m → Network → Soft AP (Wi-Fi Hotspot) → ENTER E

Using this function, you can connect the product on your mobile devices if your mobile devices do not support Wi-Fi Direct.

Set the options for connection of Wi-Fi device.

•• Soft AP (Wi-Fi Hotspot)

Turns on or off the Soft AP (Wi-Fi Hotspot). When Soft AP (Wi-Fi Hotspot) is set to On, your mobile devices can find the product name in Wi-Fi connection list.

•• Connection Information

Shows the security key.

•• Reset password

Powering on the display creates a new security key and disconnect any existing Soft AP (Wi-Fi Hotspot) connection.

––Off / On

•• Advanced Settings

Change detailed Wi-Fi settings.

––Channel (Auto / CH.1 ~ CH.11) Change Wi-Fi channel settings.

––Signal Level (Level 1 ~ Level 5) Change Wi-Fi signal level settings.

81