Optimum Picture Quality and Afterimage Burn-in Prevention

Optimum Picture Quality

•• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product performance.

–– The number of sub-pixels by panel type: 6,220,800

•• Run Auto Adjustment to improve the picture quality. If noise is still found even after auto adjustment, adjust Coarse or Fine.

•• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

––Activate power-saving mode or a dynamic screen saver if you will not be using the product for an extended period of time.

Prevention of Afterimage Burn-in

Setting the anti-screen burn-in pattern

The anti-screen burn-in pattern automatically operates in standby mode.

•• Disabling the anti-screen burn-in pattern

On the remote control, press 2 → 2 → 7 → CH → 0.

If the remote control sensor blinks once, the pattern is disabled.

•• Enabling the anti-screen burn-in pattern

On the remote control, press 2 → 2 → 7 → CH → 0.

If the remote control sensor blinks twice, the pattern is enabled.

――When the screen is turned off, the anti-screen burn-in pattern will operate for two hours. ――Keeping the anti-screen burn-in pattern on requires extra power consumption.

What is afterimage burn-in?

Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.

Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner. When this occurs, a previous image can remain on the screen when the pattern changes. To prevent this, the accumulated voltage difference should be reduced.

――Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.

Black Matrix

Common

Colour-Filter

 

 

 

Electrode (ITO)

 

 

 

 

 

 

 

 

 

 

Source Drain

 

 

 

 

Gate

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pixel Electrode (ITO)

Storage

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Capaccitor (Cs)

TFT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Data Bus-Line

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

89

Page 88 Page 90
Page 89
Image 89
Samsung LH55UHFHLBB/XV manual Optimum Picture Quality and Afterimage Burn-in Prevention, Prevention of Afterimage Burn-in
Page 88 Page 90

LH55UHFHLBB/CH, LH55UHFHLBB/XV, LH55UHFHLBB/NG, LH55UHFHLBB/UE, LH55UMHHLBB/EN specifications

The Samsung LH55UHFHLBB/XV is a state-of-the-art display solution that exemplifies excellence in visual technology. Designed specifically for commercial use, this 55-inch ultra-high-definition (UHD) display delivers exceptional clarity and vibrant colors, making it an ideal choice for a variety of applications, including retail, corporate environments, and digital signage.

One of the standout features of the LH55UHFHLBB/XV is its 4K resolution, boasting a pixel count of 3840 x 2160. This ensures that content appears sharp and detailed, providing viewers with an immersive experience. The display utilizes Samsung's advanced LED technology, which enhances brightness and color accuracy. The HDR (High Dynamic Range) capability further enriches the visual experience by delivering a wider spectrum of colors and better contrast, bringing images to life in a way that standard displays cannot match.

In addition to its impressive display quality, the Samsung LH55UHFHLBB/XV offers a robust set of connectivity options. With multiple HDMI, DisplayPort, and USB inputs, users can easily connect a variety of media sources. This versatility is essential for businesses that need to switch between different content types, whether it be video presentations, live broadcasts, or static images.

Another notable aspect of this display is its durability and reliability. Designed to operate 24/7, the Samsung LH55UHFHLBB/XV is built to withstand the rigors of constant use, making it suitable for demanding environments like control rooms or busy retail spaces. Its sleek and slim design not only enhances its aesthetic appeal but also makes it easier to install in a variety of settings.

Samsung's MagicINFO software further expands the capabilities of the LH55UHFHLBB/XV by allowing users to create, manage, and schedule content seamlessly. This software integration empowers businesses to engage their audience effectively and streamline their operations.

Lastly, the display features advanced thermal management systems to prevent overheating, ensuring optimal performance even during extended usage. With its combination of superior display technology, reliable performance, and versatile features, the Samsung LH55UHFHLBB/XV is an exceptional choice for any organization looking to enhance its visual communication and marketing efforts.
Top Page Image Contents