Introduction

BNC OUT [R, G, B, H, V] (BNC Terminal (Output))

BNC (Analog PC) Connection: connecting the R, G, B, H, V ports.

The number of LCD Displays that can be connected to the loopout depends on the ca- bles, signal source, etc. With cables or signal source where there is no degradation, up to 10 LCD Displays can be connected (May not be supported depending on the connected cable).

BNC/COMPONENT IN [R/Y, G/PB, B/ PR, H, V] (BNC/Component Connection Terminal (input))

- During BNC input, please check specifications for the input ports below.

•[R/Y] --> Red port input

•[G/PB] --> Green port input

•[B/PR] --> Blue port input

-During component input, please check specifications for the input ports below.

•[R/Y] --> Green port input

•[G/PB] --> Blue port input

•[B/PR] --> Red port input

SBB Lcok

Connect the network box.

Note

•For details, please see the network box user manual.

•Purchasing the network box is optional.

Note

See Connecting Cables for further information regarding cable connections.

Remote Control

Note

The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequen- cy.