Operation
Turning the TV On and Off
Press the POWER 
button on the remote control.
You can also use the POWER 
button on the front of the panel.
Plug and Play Feature
When the TV is initially powered on, several basic settings proceed automatically and subsequently.
The following settings are available.
1.Press the POWER 
button on the remote control. The message “Plug & Play” is displayed.
2. Select the appropriate language by pressing the | or | button. | |
Press the ENTER | button to confirm your choice. |
| |
3.The message “Check antenna input.” is displayed with “OK” selected. Press the ENTER 
button.
Please check that the antenna cable is connected correctly.
4. Press the or button to select “Air”, “STD”, “HRC”, or “IRC”, then press the ENTER | button. |
5.Press the ENTER 
button to select “Start”.
The channel search will start and end automatically.
After all the available channels are stored, the “Clock Set” menu appears.
Press the ENTER 
button at any time to interrupt the memorization process.
6.Press the ENTER 
button.
Press the | or | button to move to the “Hour”, “Minute” or “am/pm”. | ||
Set the “Hour”, “Minute” or “am/pm” by pressing the | or | button. | ||
7.Press the ENTER 
button to confirm your setting. The message “Enjoy your watching.” is displayed.
•Language: Select your language.
•Air/Cable: Select your local cable company TV system.
•Auto Program: Selects between terrestrial antenna connection or your local cable company TV system. The TV automatically cycles through all of the available channels and stores them
in memory. This takes about one to two minutes.
•Clock Set: Sets the current time for the TV clock.
You can also set the hour and minute by pressing the number buttons on the remote control.
If you want to reset this feature... |
|
1. Press the MENU button to display the menu. |
|
Press the or button to select “Setup”, then press the ENTER | button. |
2. Press the ENTER 
button to select “Plug & Play”.
3. This will change or reset the settings.
