Samsung LS17MEBSSB/ILC, LS17MEDSB1/XSJ, LS19MEDSB1/XSJ, LS19MEDSBQ/EDC manual PowerSaver, Epa/Energy

Models: LS19MEBSSV/ILC LS17MEDSSQ/EDC LS19MEDSBQ/EDC LS17MEDSB1/XSJ LS17MEDSSQ/XTW LS19MEDSB1/XSJ LS17MEHSSB/ILC LS17MEBSSB/ILC LS19MEHSSV/ILC LS17MEDSSQ/VNT LS17MEDSBQ/ILC LS19MEBSSQ/ZAT LS19MEDSSQ/EDC LS19MEDSBQ/ILC LS19MEBSBQ/TRU LS17MEDSBQ/EDC LS17MEDSBQ/XSS

1 84
Download 84 pages 60.14 Kb
Page 65
Image 65

Signal Cable

15pin to 15pin D-sub cable, Detachable, 1.8 m DVI-D to DVI-D connector, Detachable, 2.0 m (Option)

Signal Connectors

15pin 3-row D-Sub connector, 24pin 3-row DVI-D connector

Power Consumption

Less than 34 W

Dimensions (W x D x H) / Weight

380.0x 57.3 x 325.0 mm / 14.9 x 2.2 x 12.8 inch (Without Stand) / 3.75 kg

380.0x 202.2 x 384.8 mm / 15.0 x 7.9 x 15.1 inch (With Stand) / 5.5 kg

VESA Mounting Interface

75 mm x 75 mm (for use with Specialty(Arm) Mounting hardware.)

Environmental considerations

 

Operating

Temperature : 50 °F ~ 104 °F (10 °C ~ 40 °C)

 

Humidity : 10 % ~ 80 %, non-condensing

Storage

Temperature : -4 °F ~113 °F (-20 °C ~ 45 °C)

 

Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability

 

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1 ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.

For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160.

Design and specifications are subject to change without prior notice.

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

 

 

 

Power off

State

Normal Operation

Power saving mode

(Power button)

 

 

 

EPA/ENERGY 2000

Power Indicator

Blue

Blue, Blinking

Black

Page 65
Image 65
Samsung LS17MEBSSB/ILC, LS17MEDSB1/XSJ, LS19MEDSB1/XSJ, LS19MEDSBQ/EDC, LS17MEDSBQ/EDC, LS19MEBSBQ/TRU PowerSaver, Epa/Energy