Samsung LS17MEDSB1/XSJ, LS19MEDSB1/XSJ, LS19MEDSBQ/EDC, LS17MEDSBQ/EDC, LS19MEBSBQ/TRU manual Gamma

closing the MagicZone after adjusting. will not show MagicTune™ again.

(System Tray is Checked)

zMagicColor mode will be different according to monitor models. MagicZone mode will show if the monitor supports the function.

Gamma correction changes the luminance of the colors with intermediate luminance.

Gamma	Gamma mode will be different according to monitor models. Some
	monitor will only support Three modes.( Mode1, Mode2, Mode3)

Image Tab Definition

Adjusts the Fine , Coarse and Position values.

zFine : Removes noise such as horizontal stripes.

If the noise persists even after Fine tuning, repeat it after adjusting the frequency

(clock speed).

Image Setup z Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the screen image area.

You may relocate it to the center using the Horizontal Control menu.

zAuto Setup : Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically.

Position Adjusts the screen location horizontally and vertically.

Sharpness Changes the clearance of image.

Option Tab Definition

You can configure MagicTune™ using the following options.

Loads the Preferences Dialog Box. Preferences in use will have an "V" in the check box. To turn on or off any Preference, position the cursor over the box and click.

Preferences z Enable task tray menu .

- To access the MagicTune™ menus, click the icon on the [task tray menu]. The menus are not displayed if the [Enable System Tray] is deselected in

[Options] ' [Basic Settings].

zSelect Language - The language chosen affects only the language of the OSD.

Source Select	z	Analog
	z	Digital

Support Tab Definition

Shows the Asset ID and the version number of the program, and allows you to use the Help feature.