Samsung LS17PLMTSQ/EDC, LS17PLMSSB/EDC, LS19PLMTSQ/EDC, LS17PLMSKB/EDC, LS17PLMSSB/DZS manual Rear

AUTO button

Power button []

Power indicator

displaying the current mode -- analog or digital input signal.) Note : If you select the Digital mode, you must connect your monitor to the graphic card's port using the DVI cable.

Use this button for auto adjustment.

Turns the monitor On/Off.

This light glows green during normal operation, and blinks green once as the monitor saves your adjustments.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods.

Rear

(The configuration at the back of the monitor may vary from product to product.)

POWER port	Connect the power cord for your monitor to the power port on the back
	of the monitor.
DVI IN port	Connect the DVI Cable to the DVI port on the back of your monitor.
RGB IN port	Connect the signal cable to the 15-pin, D-sub port on the back of your
	monitor.
POWER on/off Switch	Use this button for turn the monitor on and off.
(option)	The Kensington lock is a device used to physically fix the system
Kensington Lock
	when using it in a public place.
	(The locking device has to be purchased separately. )
	For using a locking device, contact where you purchased it.