Auto

Icons	Description

Use this button to control the brightness and contrast of the screen.

Volume can be adjusted if a cable is connected to the [ IN] port.

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or

change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

Press the [AUTO] button to automatically adjust the screen settings.

 Changing the resolution in Display Properties will activate the

This function is only available in Analog mode.

	Turn the screen on or off.

	When a control button on the product is pressed, the Key Guide will be
	displayed before the onscreen menu opens. (The guide shows the
	function of the button pressed.)
Key Guide	To access the onscreen menu when the guide is displayed, press the
	corresponding button again.
	The Key Guide may vary depending on the function or product model.
	Refer to the actual product.

1 Preparations 20

AUTO