does not | with Window OS that | follow the |
function | supports Plug and Play. | steps below (When Windows is |
properly. |
| XP); |
|
| Control Panel |
|
| Maintenance |
|
| Hardware |
|
| Monitors |
|
| Play monitor, find 'Plug and Play |
|
| monitor' by searching new |
|
| Hardware. |
|
| MagicTune™ is an additional |
|
| software for the monitor. Some |
|
| graphic cards may not support your |
|
| monitor. When you have a problem |
|
| with the graphic card, visit our |
|
| website to check the compatible |
|
| graphic card list provided. |
|
| http://www.samsung.com/monitor/magictune |
MagicTune™ | Have you changed your | Download the latest program. The program can be |
doesn't work | PC or video graphic card? | downloaded |
properly. |
| http://www.samsung.com/monitor/magictune. |
| Did you install the | Reboot the computer after installing |
| program? | the program for the first time. If a |
|
| copy of the program is already |
|
| installed, remove it, reboot the |
|
| computer, and then install the |
|
| program again. You need to reboot |
|
| the computer for it to operate |
|
| normally after installing or removing |
|
| the program. |
Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.
Check the following items if there is trouble with the monitor.
1.Check if the power cord and the video cables are properly connected to the computer.
2.Check if the computer beeps more than 3 times when booting.
(If it does, request an a service for the main board of the computer.)
3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.
4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 75 Hz when using the maximum resolution.)
5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.
If problems repeatedly occur, contact an authorized service center.
Q & A
Question
How can I change the frequency?
Answer
The frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control
