6Setup and Reset
6.6Key Repeat Time
Control the response rate of a button when the button is pressed.
6.6.1 Configuring Key Repeat Time
1When the Function Key Guide appears, select [ 
] by moving the JOG button UP. Next, press the JOG button.
2Move to SETUP&RESET controlling the JOG button UP/DOWN and press the JOG button.
3Move to Key Repeat Time controlling the JOG button UP/DOWN and press the JOG button. The following screen will appear.
SETUP&RESET |
|
|
|
|
Reset |
|
|
|
|
Eco Saving |
| 2II | ||
Off Timer |
|
| 2Q | |
Turn Off After |
|
|
|
|
|
|
| ||
PC/AV Mode |
|
|
|
|
Key Repeat Time |
| Accelerationcceleration | ||
Source Detection |
|
| 1 sec | |
Manual | ||||
|
|
| 2 sec | |
|
|
| No Repeat | |
4K
Return | Move | Enter |
|
|
|
zAcceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
6 Setup and Reset 68
