Samsung 245T Picture (AV/S-Video/Component/HDMI)

- Not available in MagicBright™ mode of Dynamic CR.

MENU → , → → , → → , → → , →

If you adjust picture using Custom function, MagicBright™ will turn to Custom mode.

Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. - Available in PC mode only

	1)	Coarse
		: Adjust the screen so that all vertical lines (noise) on the
		screen are removed. Then, use the horizontal position
		adjustment menu to move the screen to the center, as
		the screen position may change after the noise has been
		removed.
Image Lock	2)	Fine
		: Removes noise such as horizontal stripes. If the noise
		persists even after Fine tuning, repeat it after adjusting
		the frequency (clock speed).
	3)	Sharpness
		: Adjust the Sharpness.
		- Not available in MagicBright™ mode of Dynamic CR.
	4)	H-Position
		: Adjusts the screen location horizontally.
	5)	V-Position
		: Adjusts the screen location vertically.

Coarse

Fine

Sharpness

H-Position

V-Position

MENU → , → → , → → , → → , →

	The values of Fine, Coarse, position are adjusted automatically. By
	changing the resolution in the control panel, auto function is
Auto Adjustment	performed.
	- Available in PC mode only
	MENU → , →	→ , →
	You can switch the Size.
Size	1) Wide
	2) 4:3
	MENU → , →	→ , → → , →

When the PIP is on, you can adjust the PIP screen setting.

1)	Contrast
	: Adjusts the Contrast of the PIP window on the screen.
2)	Brightness
	: Adjusts the Brightness of the PIP window on the
	screen.
3)	Sharpness
PIP Picture	: Adjusts the Sharpness of the PIP window on the
screen
4)	Color
	: Adjusts the Color of the PIP window on the screen
5)	Tint
	: Adds a natural tone to the PIP window.
	- Available in AV/S-Video Mode Only

MENU → , → → , → → , → → , →

Picture (AV/S-Video/Component/HDMI)

Contrast

Bightness

Sharpness

Color

Tint