![](/images/new-backgrounds/1294034/29403437x1.webp)
Installation
Attaching the Stand
――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1 | Insert the stand neck into the stand base in the | 4 |
| direction shown in the figure. |
|
2 | Check that the stand neck is firmly connected. | 5 |
3 | Tightly fasten the connecting screw at the bottom of |
the stand base.
Place the protective Styrofoam (cushion) included in the package on the floor and place the product facing down on the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
Hold the main body of the product with your hand as shown by the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure.
- Caution
Do not hold the product upside down only by the stand.
19