Samsung LS40BHZNSF/XSJ manual Installing the Stand KIT sold separately, Connecting the LCD Display

This stand is designed for adjusting the screen angle. The company is not responsible for any problem caused when using this stand. Under no circumstances use the product as a stand for placing something on.

Installing the Stand KIT (sold separately)

1)A 'Cover-Protector' is used to protect the hole at the bottom of the LCD Display , where the stand is inserted. Be sure to remove the 'Cover-Protector' when attaching the provided Semi Stand or Stand KIT (sold separately) and cover the hole using the 'Cover-Hole' when attaching the wall mount kit.

2)Ensure that the parts are inserted in the right direction and in the right place. (M4 × L15)

3)Insert the stand into the hole at the bottom of the LCD Display.

4)Insert the screw into the hole indicated and tighten it. (M4 × L15)

Connecting the LCD Display

Using a Power cord with Earth

In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect the AC power in advance.

Note

•AV input devices such as DVD players, VCR's or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the User Controls under Adjusting Your LCD Display.

Connecting to a Computer