Jackson AJ-44 Section, Installation/Operationinstructions, Conveyor Hose Installation Continued

45	AJ-44C Series Technical Manual 7610-001 Issued: 03-21-2006 Revised: N/A
	-76-22

TYPICAL RECIRCULATING WATER HOOK-UP

FOR ALL GAS HEATED CONVEYORS

HOOKUP WHEN GAS BOOSTER HEATER

IS LOCATED TO THE RIGHT OF THE

DISHMACHINE

HOOKUP WHEN GAS BOOSTER HEATER IS LOCATED TO THE LEFT OF THE

DISHMACHINE

GAS	SECTION 2:
CONVEYOR HOSE INSTALLATION (CONTINUED)	INSTALLATION/OPERATIONINSTRUCTIONS

CONNECTION HOSES ARE CUT TO LENGTH DURING INSTALLATION.

(ENOUGH HOSE IS PROVIDED TO LOCATE THE GAS BOOTER HEATER APPROXIMATELY 9 FEET AWAY FROM THE DISHMACHINE. ADDITIONAL HOSE MUST BE ORDERED IF A GREATER DISTANCE IS REQUIRED. DISTANCES GREATER THAN 20 FEET AWAY CAN AFFECT THE HEATING PERFORMANCE OF THE UNIT)

* HOSES MARKED A IN THE ABOVE ILLUSTRATIONS CONNECT TO THE			INLET WATER CONNECTION OF THE GAS BOOSTER HEATER
** HOSES MARKED		IN THE ABOVE ILLUSTRATIONS CONNECT TO THE
	B		OUTLET WATER CONNECTION OF THE GAS BOOSTER HEATER