•The audio-video cables shown here are usually included with a Camcorder.

(If not, check your local electronics store.)

If your camcorder is stereo, you need to connect a set of two cables.

Connecting a DTV Set Top Box

Note

• The connections for a typical Set Top Box are shown below.

1)Connect a Component cable between the BNC / COMPONENT IN - PR, Y, PB port on the LCD Display and the PR, Y, PB jacks on the Set Top Box.

2)Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R]on the LCD Display and the AUDIO OUT jacks on the Set Top Box.

Note

•Select Component for the connection to a DTV Set Top Box using the SOURCE button on the front of the LCD Display or on the remote control.

Note

• For an explanation of Component video, see your Set Top Box owner's manual.

Connecting Speakers

Note

•Fasten the SET and the speaker using the screws.

*Mount the speaker set without the speaker stand.