• Problems related to audio signals and their solutions are listed below.
Problems | Solutions |
No sound. | Ensure that the audio cable is firmly connected to both the |
| |
| your sound card. |
| (Refer to the Connecting the LCD Display ) |
| Check the volume level. |
The sound level is too low.
Check the volume level.
If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program.
The sound is too high or too low. | Adjusts the Treble and Bass to the appropriate levels. |
Problems related to the Remote Control
Note
• Problems related to the remote control and their solutions are listed.
Problems
The remote control buttons do not respond.
Question
How can I change the frequency?
How can I Adjusts the resolution?
Solutions
Check the polarities
Check if the batteries are empty.
Check if the power is on.
Check if the power cord is securely connected.
Check if a special fluorescent or neon lamp is on in the vicinity.
Q & A
Answer
The frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)
Windows XP:
Set the resolution in the Control Panel → Appearance and Themes → Display → Settings.
Windows ME/2000:
Set the resolution in the Control Panel → Display → Settings.
*Contact the video card manufacturer for details.
How can I set the Power Saving function?
Windows XP:
Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver.
Set the function in the
Windows ME/2000:
Set the resolution at the Control Panel → Display → Screen Saver.
Set the function in the
How can I clean the outer case/LCD Panel?
Disconnect the power cord and then clean the LCD Display with a soft cloth, using either a cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let any water enter the LCD Display.
© 1995~2007 SAMSUNG. ALL Rights Reserved