Samsung LT22E390EI/EN, LT24D391EI/EN manual Switching between Anynet+ Devices

Advanced Features

Switching between Anynet+ Devices

1.Open the Tools menu using your remote, and then select Anynet+ (HDMI-CEC).

2.Select a device, and then wait until the switch to the selected device is completed. "" The menu appears only when you set Anynet+ (HDMI-CEC)to On in the System menu.

"" Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in progress.

"" If you have selected an Anynet+ device using the Source function, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device.

English - 69