CONFIDENTIAL
4 Alignments and Adjustments
4-1 General Alignment Instruction
1.Usually, a color
2.Use the specified test equipment or its equivalent.
3.Correct impedance matching is essential.
4.Avoid overload. Excessive signal from a sweep generator might overload the
5.Connect the TV only to an DC power source with voltage and frequency as specified on the backcover nameplate.
6.Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure that the power cord is disconnected before replacing any parts.
7.To protect aganist shock hazard, use an isolation transformer.
LTM1555(B)/LTM1755(B) |