6Setup and Reset
6.5Key Repeat Time
Control the response rate of a button when the button is pressed.
6.5.1 Configuring Key Repeat Time
1When the Function Key Guide appears, select [
] by moving the JOG button UP. Next, press the JOG button.
2Move to Settings controlling the JOG button UP/DOWN and press the JOG button.
3Move to Key Repeat Time controlling the JOG button UP/DOWN and press the JOG button. The following screen will appear.
Settings
Eco Saving |
| Off | |
PC/AV Mode |
|
|
|
DisplayPort Ver. |
|
|
|
|
|
| |
| Acceleration |
| |
Source Detection |
|
| |
| 1 sec | ||
|
| ||
Key Repeat Time |
| Acceleration | |
|
| 2 sec | |
Off Timer |
| Auto | |
Power LED On |
| No Repeat | |
|
|
| |
Configure the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once when a button is pressed.
4Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5The selected option will be applied.
6 Setup and Reset 70