Basic Features
Speaker Settings
MENU → Sound → Speaker Settings
●● Auto Volume
Because each station has its own broadcasting conditions, the volume may fluctuate each time you change the channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
"" To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume
control of the connected source device may not be applied if Auto Volume is set to Normal or Night.
●● TV Installation Type
Specify the TV's installation type. Choose between Wall Mount and Stand to optimise the TV's sound automatically.
Additional Settings
(digital channels only)
●● DTV Audio Level (MPEG /
| "" According to the type of broadcast signal, MPEG / |
| "" To increase or decrease the volume, adjust between the range 0 and |
●● | HDMI Audio Format (PCM / Bitstream): Sets the audio input signal format suitable for the external device |
| connected to the TV's HDMI port. |
●● | Dolby Digital Comp (Line / RF): This function minimises signal disparity between a dolby digital signal and a voice |
| signal (i.e. MPEG Audio, |
| "" Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night |
| time. |
| Line: Set the output level for signals greater or less than |
| RF: Set the output level for signals greater or less than |
Reset Sound
MENU → Sound → Reset Sound
Reset all sound settings to the factory defaults.
Selecting the Sound Modet
When you set to Dual fg, the current sound mode is displayed on the screen.
| Audio Type |
| Dual | Default |
A2 Stereo | Mono |
| Mono | Automatic change |
|
|
|
| |
| Stereo |
| Stereo Mono | |
|
|
| ||
|
|
|
|
|
| Dual |
| Dual f Dual g | Dual f |
NICAM Stereo | Mono |
| Mono | Automatic change |
|
|
|
| |
| Stereo |
| Mono Stereo | |
|
|
| ||
|
|
|
|
|
| Dual |
| Mono Dual f | Dual f |
|
| Dual g | ||
|
|
|
| |
"" If the Stereo signal is weak and an automatic switching, occurs, then switch to the Mono. | ||||
"" Only activated in stereo sound signal. |
|
| ||
"" Only available when the input Source is set to TV. |
|
|
English - 40